Alpine SPV-65-SXS 6.5″ Powersports Wakeboard Tower Speakers with Alpine KTA-30FW for ATV/UTV/RZR
Alpine SPV-65-SXS 6.5″ Powersports Cage Mount Speaker Pods with Alpine KTA-30FW
Alpine SPV-65-SXS 6.5″ Powersports Cage Mount Speaker Pods
Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods
You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now, you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the car.
The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and many other All-Terrain vehicles.
General Features:
- Enclosed are 6.5” Coaxial 2-Way Speakers
- 1” Teteron Dome Tweeter
- Drivers Rated IP55 Weather-Resistant
- Enclosures rated IP65 Weather-Resistant
- Steel Frame
- ASA 978 B+ Fiberglass
- Built-In Pro-Style Folding Style Clamp that will fit 1.5″-2″ Rails.
- Rotating Coated Aluminum Base
- 90-degree Plug with 20AWG Pigtail
- 90W RMS
- 225W Peak Power Handling
- Nominal Impedance 4?
- 50-22kHz Frequency Response
- Santoprene Woofer Material
- 25mm voice coil
- Diameter: 6.5 Inches
- Impedance: 4 Ohm
- Frequency Response: 50-22000 Hz
- Peak Power Handling: 225 Watts
- Color: Black
- UPC: 793276084606
- Weight: 7
- Authorized Internet Dealer
What is in the box:
- Alpine SPV-65-SXS owner’s manual
- 2 Speaker pods with integrated mounting clamps and rubber bushings
- Two 8″ Water-proof speaker connectors (threaded connector on one end / bare wire on other ends)
- 2 Vinyl logo badges
- 2 Metal logo badges
- Instruction manual
- Warranty information
- Alpine KTA-30FW
- Class-D Full Range 4-Ohm Stable 4-Channel Amplifier
- Designed for use in Side-by-Sides, Boats, Open-Top Vehicles, and Motorcycles
- RMS Power Rating: 4 ohms: 75 watts x 4 Channel
- RMS Power Rating: 2 ohms: 75 watts x 4 Channel
- 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
- Total power output: 600 watts
- CEA-2006 Compliant Amplifier
- Power Wire Harness Included
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- Soft start turn-on
- Switchable 4 or 2 channel operation
- Speaker-level (high-level) inputs
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Heavy-duty aluminum alloy heat-sink
- IP66 Waterproof Rating
- Input sensitivity: Low level: 0.2V-4V
- Input sensitivity: High level: 0.5V-10V
- Frequency Response: 15 – 36000 Hz
- Total Harmonic Distortion (THD): <0.1%
- Signal to Noise Ratio: >98 dB
- Variable high-pass filter: 50 – 400 Hz, 12 dB/octave
- Variable low-pass filter: 50 – 400 Hz, 12 dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
- Dimensions: 9-3/16″W x 3-3/4″D x 1-3/4″H
- Authorized Dealer
- 1-year Manufacturer’s Warranty
What is in the box:
- 4-Channel amplifier
- 14″ Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
- 4 Self-tapping screws (Length 3/4″)
- Connection sheet
- Limited Warranty sheet
- Thank you letter
- Alpine KTA-30FW Tough Power Pack owner’s manual
Warning:
This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
