Alpine S-SB12V 12″ Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather Resistant Amplifiers
Alpine S-SB12V 12″ Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers with Amp Wire Kit
Description
Alpine S-SB12V 12″ Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers – This bundle includes an Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.
Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure
Specifications:
Includes S-W12D4 wired in parallel
600W RMS power handling
2 Impedance
Ported enclosure design
Frequency response: 26-200 Hz
Vented enclosure tuning frequency: 35 Hz
Dimensions 17-inch W x 14.625-inch H X 15-inch
Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms
Specifications:
Alpine’s Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
Weather resistant (IP66 rating)
300W x 1 D.P.P. (2, 14.4V, 1% THD+N)
CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N)
82dB S/N (ref. 1W into 4)
>0.05% THD
OEM-grade Tyco 26-pin connector with pigtail wire harness
Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier
Specifications:
Alpine’s Class D amplifier circuit with Dynamic Peak Power (D.P.P.)
Weather resistant (IP66 rating)
150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N)
CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N)
82dB S/N (ref. 1W into 4)
>0.05% THD
OEM-grade Tyco 26-pin connector with pigtail wire harness
Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)
Sound control:
Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable)
Input gain settings (variable)
2ch/4ch input (selectable)
General Features:
- Complete 4 Gauge Amplifier Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provide optimal power transfer
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
- Terminals are gold-plated for excellent signal transfer
- For use in any car, truck, RV, or boat
- Authorized Internet Dealer
- 1-year Manufacturer’s warranty
Package Includes:
- 17 ft. of red 4 AWG high current power cable
- 3 ft. of black 4 AWG ground cable
- 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
- 20 ft. of 12 AWG OFC Speaker cable
- 20 ft. of 16 AWG remote turn-on wire
- 6 ft. of split loom tubing
- 1 Gold plated 80 AMP AGU fuse
- 1 4 AWG gold ring terminal
- 1 4 AWG water-resistant inline fuse holder
- 2 Ring terminals
- 2 Spade terminals (4 gauge)
- 5 Spade terminals (14-16 gauge)
- 3 Self-tapping screws
- 1 Rubber grommet
- 20 Black cable ties
- 2 Butt connectors (18-22 gauge)
- 1 Butt connector (4 gauge)
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
